How to care for your powder coating?
Nov 24, 2022 Posted by Brittany Cunningham
All Delmade equipment is proudly powder coated by Tas Powder Coating our branded powder coating service.
Powder coating is an extremely durable surface coating, ideally suited for the harsh environments in which farm equipment operates daily. To ensure you get the longest life out of your powder coating a regular care & maintenance schedule is recommended.
"Dulux Powder & Industrial Coatings recommends the following care and maintenance of powder coated surfaces:
Clean your Powder Coating in 3 Easy Steps
Care and maintenance schedules are essential to ensure that the life of your asset is maximised. Simply follow 3 important steps:
- Carefully remove any loose surface deposits with a wet sponge by gently rubbing.
- Clean by gently rubbing the surface with a soft brush (non-abrasive) and a dilute solution of a mild detergent, e.g. pH-neutral liquid hand or dishwashing detergent in warm water to remove dust, salt and other deposits.
- For stubborn stains use only recommended solvents on the affected area, e.g. Isopropyl alcohol (IPA) or methylated spirits and rinse off with clean water.
- Do not use other aggressive solvents.
- Rinse the surfaces with clean fresh water after cleaning to remove all residues.
The Do's & Dont's of protecting
- Do protect all powder-coated components
- Do not use aggressive solvents; Do not use turpentine, white spirits, thinners, citrus-based cleaners or other aggressive solvents on powder coating.
- Do remove unwanted paint & sealants
- Do not rub powder-coated surfaces excessively, especially metallic finishes.
- Do use recommended solvents for stubborn stains only; Use only Isopropyl alcohol (IPA) or methylated spirits and rinse off with clean fresh water.
- Do not allow sunscreen to come into contact with coated surfaces
- Do regularly inspect your powder coating and clean more regularly if required
- Do not neglect recommended care and maintenance schedules
- Do clean in mild conditions; i.e. surface temperatures are below 25°C
It is important to be aware that non-approved solvents can cause damage that may not be visible immediately and may take up to twelve months to appear."1
Do you have questions about the best maintenance for your powder coating? Call 1800 335 623 to chat with our team.
1Credit to Dulux Powder Coating
Care and maintenance of powder coated surfaces - dulux powder coatings (no date). Available at: https://duluxpowders.com.au/wp-content/uploads/2018/03/Dulux-Powders-Care-and-Maintenance-Tech-Advice-Brochure-0218.pdf (Accessed: November 13, 2022).